Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

rubber+metal flat gaskets

Status
Not open for further replies.
juancito

juancito

Mechanical
Joined
Nov 30, 2000
Messages
64
Location
AR
The gasket of this query consists of a metalic flat ring, say 2mm thick, fully surrounded by EPDM rubber in order to get a finnal thickness of 8mm. These kind of gasket, from what I know so far, are only fabricated in Germany.
Does anyone know some gasket manufacturer in USA that can quote the above described ring gasket?
Thanks in advance


 
Status
Not open for further replies.

Similar threads

Karik87
  • Question Question
CVN test at Weld Metal with ER70S-6
Replies
19
Views
11K
weldstan
weldstan
Santiago Vacca
  • Locked
  • Question Question
Per B31.3 Impact test exemption of weld metal below (continuation of closed thread292-509093)
Replies
2
Views
793
Santiago Vacca
Santiago Vacca
AlbertaMecchie
  • Question Question
B31.1 - 124.7 Nonferrous Metals
Replies
0
Views
4K
AlbertaMecchie
AlbertaMecchie
Bflo
  • Locked
  • Question Question
Metal 3D printers suggestions/reivews about $10K or less with small volume high precision?
Replies
4
Views
562
Bflo
Bflo
ethan18
  • Locked
  • Question Question
QW-423 – Use Of Alternate Base Metal For Welder Qualification Coupon
Replies
12
Views
1K
ethan18
ethan18

Part and Inventory Search

Sponsor

Back
Top