If there is anyone who could help me with literature or books or tips to do inspection on rubberlining, and painting of galvanised steelwork, whats steps should be followed and also tips on fibre glass piping - what tests are there available? I also need this information for welding of polypropyleen products. and (what tests are there to insure that proper welding has been done)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rubber Lining, and painting of galvanised steelwork 1
- Thread starter reedijk
- Start date
-
1
- #2
As far as lining and painting inspection goes, don't expect to get tips from here and then go out and do it. Bring in a qualified inspector: NACE, CSWIP/BGAS, or Frosio
The tests for GRP piping are contained in ISO 14692 (4 parts)
EN 13607 will cover the qualification of plastics welders and EN 13100 will cover NDT
Steve Jones
Materials & Corrosion Engineer
The tests for GRP piping are contained in ISO 14692 (4 parts)
EN 13607 will cover the qualification of plastics welders and EN 13100 will cover NDT
Steve Jones
Materials & Corrosion Engineer
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question