Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
rough finishing tool path
- Thread starter red987
- Start date
There are many parameters in CAM and the controller that affect this. Tolerance would be the first place to start.
I suggest you contact GTAC, or provide more details and ask for suggestions in the GTAC support forum for NX CAM.
Mark Rief
Product Manager
Siemens PLM
I suggest you contact GTAC, or provide more details and ask for suggestions in the GTAC support forum for NX CAM.
Mark Rief
Product Manager
Siemens PLM
- Status
Similar threads
- Locked
- Question