brayle
Mechanical
- Jan 21, 2003
- 3
I need help with a rough cost estimate for what amounts to a 6" diameter hollow "sweep" (long radius) 90 degree elbow. If the elbow were straightened out the length would be about 30 inches. The material would be like that used for trash cans, I guess.
1/8th inch wall thickness.
Our needs are modest, 500 to 5000 per year.
Also, We could use 100 for market testing, is there any low cost way to produce some?
brayle
1/8th inch wall thickness.
Our needs are modest, 500 to 5000 per year.
Also, We could use 100 for market testing, is there any low cost way to produce some?
brayle