Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rotational stiffeness in node

Status
Not open for further replies.
kribri

kribri

Materials
Joined
Feb 17, 2009
Messages
20
Location
NO
Hi,
I have a challenge with modeling rotational stiffness of my model. Attached is a picture of the model.
I want to change the rotational stiffness for the z-rotation in the joint between the four shells/panels.

How can I do this in Abaqus?

kind regards
K
 
Status
Not open for further replies.

Similar threads

F
  • Question Question
ABAQUS error - 'Node set assembly_left_rp' has not been defined
Replies
1
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
D
  • Locked
  • Question Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
K
  • Locked
  • Question Question
How to Directly Output Strain Values for Specific Node/Element Sets Without Writing an ODB File in Abaqus?
Replies
3
Views
2K
FEA way
FEA way
alegio20
  • Locked
  • Question Question
How to define an elastic boundary condition? Rotational in my case
Replies
4
Views
473
alegio20
alegio20
heaven14
  • Locked
  • Question Question
Node Stiffness
Replies
1
Views
221
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top