Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rotation of the principal axes of inertia.

Status
Not open for further replies.
crashkeeper

crashkeeper

Structural
Joined
Feb 12, 2008
Messages
8
Location
PT
Hi, I would like to know, for a beam44, how to get the rotation angle of the principal axes of inertia from the global axes (theta). If i define Real Constants i have to input it, but if I use a cross section, ansys determine it automaticaly. how can I get it from the output?

Thank you
Diogo
 
Status
Not open for further replies.

Similar threads

nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
O
  • Question Question
Simulation of a screw connexion
Replies
1
Views
4K
dgeesaman
dgeesaman
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
andradesilva
  • Locked
  • Question Question
how to print on the screen or export the axial inertia moment of a model, in ANSYS Mechanical APDL
Replies
1
Views
590
gnc89
gnc89
T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T

Part and Inventory Search

Sponsor

Back
Top