Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

rotate text about a circle

Status
Not open for further replies.

drewcon18

Mechanical
Joined
Dec 1, 2006
Messages
6
Location
US
Is there a command to rotate text about a circle, so that the text is always aligned with the center of the circle and equal distance away from it?
 
Under Express tools, in the Text sub-menu, there is an Arc-Aligned Text option that does what you're describing. You may have to install the Express tools if you don't already have them, or I'm sure there are other lisp routines out there too that do the same.

#
 
Search on this forum for arc text and you should be able
to see other replies. I think atext and arctext were
ACAD commands and not certain if they are still available
in the 2007.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top