Aug 11, 2004 #1 LovinLife Mechanical Joined Aug 11, 2004 Messages 27 Location US Is there a way to rotate other than holding cntrl. key and using middle mouse bttn. Using pro e 2001 / seems there should be an toolbar icon or something. Thanks
Is there a way to rotate other than holding cntrl. key and using middle mouse bttn. Using pro e 2001 / seems there should be an toolbar icon or something. Thanks
Aug 11, 2004 #2 looslib Mechanical Joined Jul 9, 2001 Messages 4,205 Location US Spaceball, but no icon. In wildfire, the MMB is all that is needed for rotate. "Wildfires are dangerous, hard to control, and economically catastrophic." Ben Loosli CAD/CAM System Analyst Ingersoll-Rand Upvote 0 Downvote
Spaceball, but no icon. In wildfire, the MMB is all that is needed for rotate. "Wildfires are dangerous, hard to control, and economically catastrophic." Ben Loosli CAD/CAM System Analyst Ingersoll-Rand
Aug 11, 2004 1 #3 timjr Automotive Joined Nov 25, 2002 Messages 7 Location US Get a Microsoft 5 button mouse, and program the left side button (where your thumb will be) to act as the ctrl key. Works great. Upvote 0 Downvote
Get a Microsoft 5 button mouse, and program the left side button (where your thumb will be) to act as the ctrl key. Works great.