Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Roof Design

Status
Not open for further replies.

BETM

Mechanical
Joined
Mar 26, 2003
Messages
1
Location
VE
Please ¿Are you know design of roofs with girders rings, rafters, columns for atmosferic storage tanks API-650? ¿Which is the procedure for calculations and designs of structural roofs?
 
Consult a Structural Engineer. This requires a professional qualified in this discipline and it's safer.
 
My friend, you are in for a long calculation. The requirements relating to the supported tank roof is discussed in detail in AP!-650. If the job is an expensive one, and you can bear the cost, you could invest in a neat piece of software called TANK by COADE (Phone 281-890-4566). This programme will design the major components of the roof, including the ring girders, rafters and purlins. I have used this programme, and it works. You can also get details on their web site at
If you have (or can steal, borrow, or view) a copy of the book 'Process Equipment Design' by Brownell & Yound, there is a ton of stuff in there that will help you. The book is available at Brown Bookshop in Houston Texas for about $250, but well worth the cost.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top