Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Roller bearing standard for angle of misalignment
- Thread starter UCengno1
- Start date
regular cylndrical roller ?
page "585" here -
Skf's CARB bearings have a curious profile that permits a lot more.
Better to provide a statically self-aligning feature if there is not a common housing.
page "585" here -
Skf's CARB bearings have a curious profile that permits a lot more.
Better to provide a statically self-aligning feature if there is not a common housing.
BearingDave
Mechanical
There are various types of roller bearings.
Cylindrical roller bearings only accept a couple minutes of arc of misalignment before having their performance affected.
Spherical roller bearings can accommodate between 1.5 and 2.5° degrees of misalignment, depending on their series.
You need to better define what type of roller bearing we are talking about here. "Standard" is not enough information.
Cylindrical roller bearings only accept a couple minutes of arc of misalignment before having their performance affected.
Spherical roller bearings can accommodate between 1.5 and 2.5° degrees of misalignment, depending on their series.
You need to better define what type of roller bearing we are talking about here. "Standard" is not enough information.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question