Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rodine 213 & sulphuric acid
- Thread starter nas7
- Start date
I haven't heard of using Rodine 213 with H2SO4, only with HCL in the range of 0.05%-0.1% v/v.
If we used a Rodine product for H2SO4 it was Rodine 85.
You could contact the Henkel Corp as they took over from Parker who took over from Amchem.
The Henkel site is very convoluted and it is hard to find any information and my suggestion would be to find a distributor of Henkel Surface Technology Products and take that route.
If we used a Rodine product for H2SO4 it was Rodine 85.
You could contact the Henkel Corp as they took over from Parker who took over from Amchem.
The Henkel site is very convoluted and it is hard to find any information and my suggestion would be to find a distributor of Henkel Surface Technology Products and take that route.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question