Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Robustness of temperature sensors

Status
Not open for further replies.
mborges

mborges

Petroleum
Jul 30, 2003
5
Needing to measure temperature, at the output of a compressor, I would like the best sensor choice (RTD or Thermocouples) considering that a compressor may be subjected to high vibration levels.

Best,

Mike
 
Status
Not open for further replies.

Similar threads

Vivaldi M. Smith
  • Locked
  • Question
High High trip of a natural draft Heater stack temperature 1
Replies
3
Views
2K
Vivaldi M. Smith
Vivaldi M. Smith
BSMEclassof2012
  • Question
Premature Deterioration of Ozone Diffuser Gaskets – Request for Support
Replies
3
Views
3K
btrueblood
btrueblood
1946ladjal
  • Locked
  • Question
Trim Bed for adsorption of heavy aromatics
Replies
2
Views
1K
1946ladjal
1946ladjal
ritesh bindal
  • Locked
  • Question
Doubt in the represntation of the PID Controllers in P&ID diagram
Replies
1
Views
1K
Heaviside1925
Heaviside1925
yamoffathoo
  • Locked
  • Question
Does aeration of a vinyl acetate based emulsion containing carbon fibers reduce LDV?
Replies
3
Views
1K
yamoffathoo
yamoffathoo

Part and Inventory Search

Sponsor

Back
Top Bottom