Jun 26, 2006 #1 Granny36 Civil/Environmental Jun 29, 2004 10 Has anybody modeled a roadway as a custom weir? I would like some advise on how to accomplish this. Thanks
Has anybody modeled a roadway as a custom weir? I would like some advise on how to accomplish this. Thanks
Jun 26, 2006 #2 psmart Active member Feb 3, 1999 1,524 A custom weir can be used to model an arbitrary weir cross-section. For example, to define a trapezoidal flow section over a road you might use: Line#1: Head=0', Width= level section of roadway Line#2: Head=1', Width= flow width with 1' of head For other shapes, use as many head/width values as required to define the cross-section. Upvote 0 Downvote
A custom weir can be used to model an arbitrary weir cross-section. For example, to define a trapezoidal flow section over a road you might use: Line#1: Head=0', Width= level section of roadway Line#2: Head=1', Width= flow width with 1' of head For other shapes, use as many head/width values as required to define the cross-section.
