Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

RJ45 port tester

Status
Not open for further replies.

tdstds

New member
Oct 23, 2003
1
Would anyone have a schematic for a network port detector? Id like to be able to plug test box into wall to see if port is live? Any thoughts appreciated.

Kind regards,
Todd
 
Replies continue below

Recommended for you

Hi-

Most simple hubs have data a connection leds on their ports.
Maybe going to a local computer store and buying a small
4 port hub will help?

Cheers,

Rich S.
 
There should be a small amount of power across pins 1 & 2 and 3 & 6. I forget which pair gets energized by the hub, but I think that it is 1 & 2. A simple diode across the pins should do the trick.

Of course this wouldn't mean that the outlet worked, only that the pair from the hub is good.

Still, better than nothing.


--
pansophic
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor