Risk assessment/ Riskanalysis of design change

[naah]

Hello
I am working within automobile section. Our supplier can not manufacture one part according to our requirements.
Now I am going to do a risk assessment/ Risk analysis. I have never done it before. I want to know if there is any standard risk assessment/risk analysis template which I can use for impact of design change?

All the best and thank in advance for all kind of advices

NJ

 

[IRstuff]

If it's an existing vehicle, there should already be a Failure Modes, Effects, and Criticality Analysis (FMECA), which would reference your component if it were a safety critical element.

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert!

https://www.youtube.com/watch?v=BKorP55Aqvg

faq731-376 forum1529 Entire Forum list

http://www.eng-tips.com/forumlist.cfm

 

[GregLocock]

There should also be a DVP&R which lists what tests you need to do (and pass) to ensure that it passed the FMEA

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?