Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
RISA Foundation - Revit integration
- Thread starter gb156
- Start date
JoshPlumSE
Structural
RISAFoundation - Revit integration is on the horizon, but we don't have a specific release date yet.
If you use RISAFoot (from inside RISA-3D, not RISAFoundation) then we can export this information over to Revit with the current links. But, that's just for single spread footings.
There really aren't any good work arounds that I can think of that work for slabs or pile caps. RISAFoundation does have the ability to export DXF files, which can problably be imported into Revit.... But, that's basically like incorporating an AutoCAD drawing into your Revit model.
If you use RISAFoot (from inside RISA-3D, not RISAFoundation) then we can export this information over to Revit with the current links. But, that's just for single spread footings.
There really aren't any good work arounds that I can think of that work for slabs or pile caps. RISAFoundation does have the ability to export DXF files, which can problably be imported into Revit.... But, that's basically like incorporating an AutoCAD drawing into your Revit model.
- Status
Similar threads
- Locked
- Question