Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

RIGID BODIES

Status
Not open for further replies.
PQF

PQF

Automotive
Joined
Jun 23, 2008
Messages
13
Location
DE
I'm just starting with ABAQUS/standard. I'm having a lot of problems getting a rigid body to translate. The problem is actually very simple. A rigid body clashing with another solid .... Can Anybody help me?
 
Sort by date Sort by votes
You'll have to be a bit more specific about what the problem is..?

Regards

Martin Stokes CEng MIMechE
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question Question
Concentrated Force on a Rigid body reference point
Replies
2
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
A
  • Locked
  • Question Question
Cohesive Elements compressive limit to keep bodies affecting it from reaching each other
Replies
1
Views
2K
FEA way
FEA way
gyanendra singh
  • Locked
  • Question Question
sloshing in cylindrical rigid tank
Replies
2
Views
335
gyanendra singh
gyanendra singh
TwiceYTPL
  • Locked
  • Question Question
Need Help Removing Rigid Body Constraints in Abaqus
Replies
3
Views
845
FEA way
FEA way
R.S
  • Locked
  • Question Question
Using Axisymmetric rigid surface contact element such as IRS21A or ISL21AT
Replies
5
Views
785
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top