Rib

[Richy]

How do i create a rib inside a pipe bend?

Its actually a flow straightener in a suction bend.



Pro E will not let me extrude a rectangular section using 'upto surface' or 'through to next' probably because the section is already touching the inside of the pipe.



Thanks for any suggestions.........

 

[Guest]

I haven't tried it, but you can try creating a surface copy on the pipe, and extrude up to that surface.

 

[Jake]

I created a flow straightener in both a real Pro/piping extract solid and a shelled sweep pipe. I used extrude and thru-next. There was nothing special. If you still cant get it reply with more info about the part and the feature.