Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rib - drafting
- Thread starter gigon
- Start date
beachcomber
Mechanical
Not automatically, and I don't think any CAD system will.
You can do it by removing the hatching from the view, adding a line by drawing in view and then manually hatching.
Other than that most people just live with it being not to standards.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
You can do it by removing the hatching from the view, adding a line by drawing in view and then manually hatching.
Other than that most people just live with it being not to standards.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
Actually, some of the newer versions of the standards do allow ribs to be sectioned as I understand it, presumably a concession to CAD.
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
What is Engineering anyway: faq1088-1484
- Status
Similar threads
- Locked
- Question
- Locked
- Question