Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

RG5 or CuZn35Ni ?

Status
Not open for further replies.
sotelo

sotelo

Marine/Ocean
Joined
May 14, 2002
Messages
2
Location
ES
I have several valves with CuZn35Ni shafts but my customer requested they should be Rg5 (DIN 1705). I consider those materials to be equivalent, don´t you think so?
 
Status
Not open for further replies.

Similar threads

dandy408
  • Question Question
Strongest material heat treated or non-heat treated
Replies
1
Views
7K
EdStainless
EdStainless
enginesrus
  • Locked
  • Question Question
What brass or bronze for water couplings?
Replies
9
Views
6K
Brooke William
B
APIpipeWholesaler
  • Locked
  • Question Question
12.5 % + or - WALL TOLERANCE ON CARBON STEEL PIPE
Replies
3
Views
1K
LittleInch
LittleInch
David Maijala
  • Locked
  • Question Question
Cold forming AL alloy in W or AQ condition
Replies
4
Views
479
MagBen
MagBen
spray_arc
  • Locked
  • Question Question
Unified Numbering System UNS, Can I assign to EN or GB C/S material
Replies
2
Views
535
spray_arc
spray_arc

Part and Inventory Search

Sponsor

Back
Top