Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Revit sloped level.

Status
Not open for further replies.
Elindio1

Elindio1

Structural
Joined
Oct 13, 2006
Messages
21
Location
PR
I'm new to REVIT 2008 structural and I have the following question. How can you set a level slope. For example, a roof level with high point 21' and low point 16'.
I do not seem to find how to do it. Thanks
 
Sort by date Sort by votes
construct the supports at first. And then in 3D view draw the slab/roof...it will work.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

SPR Baker
  • Locked
  • Question Question
2 Difference Level Slab on Beam
Replies
1
Views
289
M.Honda
M.Honda
SPR Baker
  • Locked
  • Question Question
How to model beam with 2 different slab level in Etabs
Replies
5
Views
1K
M.Honda
M.Honda
Michael_92
  • Locked
  • Question Question
Add walls/columns on the level the start
Replies
1
Views
154
Trenno
Trenno
andrew17
  • Locked
  • Question Question
4 Level addition to concrete building
Replies
0
Views
107
andrew17
andrew17
Ahmad Alhamad
  • Locked
  • Question Question
how to module 2 slabs with small levels differences
Replies
0
Views
145
Ahmad Alhamad
Ahmad Alhamad

Part and Inventory Search

Sponsor

Back
Top