Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reverse Shell elements 1

Status
Not open for further replies.
cesarvb66

cesarvb66

Civil/Environmental
Joined
Jun 1, 2011
Messages
1
Location
ES

Dear all

I´d like to know if there are any command to reverse SHELL elements or its depends of the modeling of its areas?
Thanks
Cesar

 
Sort by date Sort by votes
If you're referring to element normals, in ANSYS Mechanical you can do this easily with the ENORM command.


------------
See faq569-1083 for details on how to make best use of Eng-Tips.com
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Tegguy
  • Locked
  • Question Question
ANSYS: Beam Elements vs Joint Stiffness?
Replies
11
Views
2K
Tegguy
Tegguy
andradesilva
  • Locked
  • Question Question
thin-walled 3D solid to a shell
Replies
1
Views
487
Stick.
Stick.
andradesilva
  • Locked
  • Question Question
modal analysis in ANSYS Mechanical APDL 2020 R2: How to see graphical results without mesh/elements
Replies
1
Views
944
NRP99
NRP99
PedroCarneiro22
  • Locked
  • Question Question
Mpc184 solid elements
Replies
0
Views
333
PedroCarneiro22
PedroCarneiro22
matparta
  • Locked
  • Question Question
Relationship between mid shell stresses and top/bottom?
Replies
1
Views
1K
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top