Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Retrieve RMS ply stresses for a random frequency response

Status
Not open for further replies.
agarmar

agarmar

New member
Joined
Apr 20, 2018
Messages
2
Location
DE
Hello, I posted the same question in the aircraft engineering forum but maybe here is more convenient.

Is it possible to retrieve the RMS composite stress in a random frequency response in nastran 2017?
It looks like Nastran shows only the RMS stress for pshells. However, composite stresses are shown for the frequency response subcase (sol 111) before applying the random analysis.

I used the option STRESS(PLOT,REAL,CRMS)=ALL and this shows no RMS stress for composite (PCOMPG)

Thanks a lot!
 
Status
Not open for further replies.

Similar threads

LWat
  • Locked
  • Question Question
Freq Response (Sol111) - output file size
Replies
3
Views
849
dmapguru
dmapguru
stefanix1972
  • Locked
  • Question Question
Nastran random response analysis on a free-free structure
Replies
2
Views
1K
stefanix1972
stefanix1972
EKCP
  • Question Question
TABLES1 limited number of stress/strain entries for SOL 401 Using FEMAP 24.06
Replies
6
Views
15K
rb1957
rb1957
Gabrieldondeu
  • Locked
  • Question Question
Freq response (SOL 111) of a composite model on Nastran: no stress calculated in pcomp elements
Replies
1
Views
688
dmapguru
dmapguru
ghylander
  • Locked
  • Question Question
Use of MFLUID for external fluid field
Replies
0
Views
1K
ghylander
ghylander

Part and Inventory Search

Sponsor

Back
Top