Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

results of tests as per SA-480

yurachv

yurachv

Petroleum
Joined
Dec 27, 2014
Messages
4
Location
RU
As per SA-480,
"8.1 A report of the results of all tests required by the product
specification shall be supplied to the purchaser".

My concern is: "results" of test shall be in the form of numerical values (for example: Tensile Strength, 460 MPa) OR stated in the notes (remarks) that the properties comply with material specification (see photo-shot below)?
Can smb, pls, help to understand SA-480 requirements.
 

Attachments

  • photo_2025-07-04_12-04-59.jpg
    photo_2025-07-04_12-04-59.jpg
    36.7 KB · Views: 1
You must log in or register to reply here.

Similar threads

MujtabaQA
  • Locked
  • Question Question
Who can explain about Thin-wall pipe as per ASTM standard
Replies
6
Views
2K
EdStainless
EdStainless
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
jzeds
  • Locked
  • Question Question
ASTM tests performed using hydraulic press
Replies
1
Views
1K
TigerGuy
TigerGuy
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Muza33
  • Locked
  • Question Question
SA 537 CL 2 Welding electrode
Replies
3
Views
1K
DVWE
DVWE

Part and Inventory Search

Sponsor

Back
Top