Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations 3DDave on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Restoring of condansate floating roof tank

Status
Not open for further replies.

mustafa2014

Mechanical
May 30, 2013
56
dear all,

good day

we have faced a problem n our gas plant, when our fair team was doing a test to the hydrants over the tank.
the roof was fall of water over it , which cause skewed to the roof and that's lead the condensate to escape over the roof. Could any one explain or guess the reason??

even more we are going to restore the tank, have any one a scope of work should be done or any tasks should we consider??please send to us

many thanks for your cooperation in advance
 
Replies continue below

Recommended for you

mustafa,
It appears that you are not qualified to provide true professional advice on the roof restoration. Do a favor to your company and ask for help a professional tank fabricator for a thorough inspection of the tank and roof and review their professional advice on the restoration procedure. You may also contact other two tank fabricators for 'second' opinion and then decide who is better equipped for the job. Don't ruin those tanks!
Cheers,
gr2vessels
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor