Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Response spectrum analysis

Status
Not open for further replies.
bkal

bkal

Structural
Joined
Feb 27, 2003
Messages
275
Location
GB
I need to specify different input spectra at different groups of boundary nodes in Abaqus 6.5 (structure supported at different levels in the building, so different suuports see different input motions). Is it possible to model this in ABAQUS.

Thanks,
 
Status
Not open for further replies.

Similar threads

mj345
  • Question Question
Dynamic analysis
Replies
1
Views
4K
FEA way
FEA way
Hossein3ds
  • Question Question
Error during Thermo-mechanical Analysis
Replies
1
Views
3K
FEA way
FEA way
jorge0894
  • Locked
  • Question Question
Restart analysis in Abaqus Explicit Error
Replies
3
Views
3K
FEA way
FEA way
hwa0725
  • Locked
  • Question Question
ABAQUS: Connector Response Not Matching Input
Replies
2
Views
505
hwa0725
hwa0725
R
  • Locked
  • Question Question
Creep Analysis in Abaqus
Replies
3
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top