Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reservoir mixing (homogenization) calculations

Status
Not open for further replies.

EcuaDerek

Mechanical
Mar 3, 2016
4
CA
I have a reservoir, 65'W x59'L x 11.5' D full of water, I want to ensure homogenization being that I will test pH at the outlet, and dose acid or base accordingly to maintain specific pH range.

Is floating mixers the best way to ensure homogenization in a basin this size, or should I be concentrating on a different technology that may have a lower capital cost?


If floating mixers is an acceptable mixing method, How should I calculate the number of floating mixers, motor power, diameter/type of impellers?

Thank you
 
Replies continue below

Recommended for you

What is the hhydraulic detention time and how quickly can you dose the acid or base?

Regards
Ashtree
"Any water can be made potable if you filter it through enough money"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Top