Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Required Wall Thickness of Finished Bend

Status
Not open for further replies.

SmallInfo

Petroleum
Joined
Oct 30, 2017
Messages
104
Location
PK
Greetings!
I am provided this calculation sheet for required wall thickness of finished cold bend but can't figure out from where the value 39.5 is taken and this calculation is for 8 inches Dia. why in row no. 58 its saying 12.70 wall thickness when we calculated wall thickness of pipe in above calculation in row 39 is 7.82 mm.
Kindly help me understand this.
Thanks
cold_bend_thickness_lug2ew.jpg
 
LittleInch, GBTorpenhow, 1503-44
Thank you guys, I really appreciate your efforts and time. You guys are amazing.
Thanks again
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top