mgk12345
Mechanical
- Jun 20, 2007
- 3
hi..
i am trying to change the solid element by the eqivalent shell element to reduce the computation time.
i got the modal analysis result within 10% for solid and shell element but % difference in the stiffness in x y and z direction is more than 20%.
i am using the solid 185 and the shell 63 for the comparison.
can anyone guide me about this problem...
i am trying to change the solid element by the eqivalent shell element to reduce the computation time.
i got the modal analysis result within 10% for solid and shell element but % difference in the stiffness in x y and z direction is more than 20%.
i am using the solid 185 and the shell 63 for the comparison.
can anyone guide me about this problem...
