Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Replace 2D template because of new compagny logo

Status
Not open for further replies.
rossen

rossen

Mechanical
Joined
Sep 18, 2003
Messages
6
Location
US
Hi all,
We have changed our company logo and therefore we need to replace the loge on all our 2D drawings.
I have done this when I was working with Solid Edge. By using a program called “replace background” it was possible to replace one drawing template with another – for all drawing in the same operation.

Is this possible with Inventor??

/henrik
 
Sort by date Sort by votes
to answer my own question:) ......\Inventor 11\Bin\Drawing Resource Transfer Wizard - will do it
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

myvice542
  • Locked
  • Question Question
assembly frozen up after sitting for a number of days
Replies
0
Views
820
myvice542
myvice542
Legoet
  • Locked
  • Question Question
Opening Autocad Created template in inventor.
Replies
1
Views
249
TuanTH
TuanTH
G
New to this forum - convert sheet metal to solid doesn't work
Replies
0
Views
6K
gdgdad
G
E
New to the forum, question about a pin and slider joint
Replies
0
Views
6K
EightballRider8
E
T
Placing part in Assembly but it is out of date?
Replies
0
Views
8K
The One
T

Part and Inventory Search

Sponsor

Back
Top