Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

repair Monal casting grade M 35-1 1

Status
Not open for further replies.
smart143

smart143

Mechanical
Joined
Feb 3, 2012
Messages
78
Location
IN
We have to repair monel casting M35-1 (ASTM A494)UNS No. N24135 by GTAW process. can anybody suggest suitable filler wire & precautions during & post welding.
 
Sort by date Sort by votes
Filler would be ERNiCu-7. You will need to qualify a weld procedure in order to legitimately repair the casting. Keep in mind that you want to control your interpass to 300-350f Max and that good pre-cleaning and interpass cleaning are necessary to successfully weld this material. Fully remove the defect prior to welding.
 
Upvote 0 Downvote
Once the weldment reaches an ambient temperature, make sure to perform PT. This is a must.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question Question
12" Ball Valve Repair
Replies
3
Views
3K
johnengkol
johnengkol
skengg
  • Locked
  • Question Question
REPAIR WELDING ON SIDE FLANGES OF A VALVE
Replies
4
Views
708
skengg
skengg
skprveng
  • Locked
  • Question Question
Spots in Valve casting Body
Replies
2
Views
281
thruwall
thruwall
skengg
  • Locked
  • Question Question
13% Cr. weld deposit on body (WCB grade).
Replies
5
Views
603
skengg
skengg
S
  • Locked
  • Question Question
API 6A standard 10000psi ball valve material selection
Replies
4
Views
2K
Sean_Wei
S

Part and Inventory Search

Sponsor

Back
Top