We need to paint power transmission towers that have been galvanized 20 years ago, and about 80% of the zinc coating remains. The surface will be sandblasted to white metal, and the zinc-coated area will be only sweep-blasted and roughened. Is WB or SB IOZ suitable for such repair?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Repair HDG with IOZ
- Thread starter Galvarex
- Start date
Similar threads
