Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reorder sheets in NX6 drafting

Status
Not open for further replies.

tonyjosephpaul

Mechanical
Joined
Nov 21, 2007
Messages
19
Location
SE
Can we reorder drawing sheets in NX6 drafting.Examle.
If I have two sheets in the drawing sheet01 and sheet02,can I reorder sheet02 1st and sheet 02 second in NX drafting
 
You can reorder the sheets, however, if you use the system parameter on your formats, they will still be sheet 02, then sheet 01.
The work around is to take the sheet 01 data to a new sheet 03, then delete the original sheet 01.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
Please let me know how to reorder(procedure in NX6).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top