Rendering window closes

[AeroNucDef]

Hi all,

I'm trying to render a model using photoview 360 which is now a add-on in SW 2011.

About half way through the rendering process, the render window closes for some reason. There's no warnings or errors, it just closes. Anyone got a explanation of what going on.

PC Spec:
SW 2011
P4 Chip
3Gb Ram

 

[ctopher]

Seems like a memory or video card issue.

Chris
SolidWorks 10 SP4.0
ctopher's home
SolidWorks Legion

 

[rockguy]

My guess is your running out of memory. Try rendering a smaller image (640 x 480 maybe or something similar)at a render quality setting of good and see if that completes. If it does then you can keep increasing the size/quality until it fails. Then you'll know your systems limit.

Rob Rodriguez CSWP

http://www.axiscadsolutions.com

http://www.robrodriguez.com

http://www.swugn.org

http://www.nvtswug.com

SW 2011 SP 3.0

 

[AeroNucDef]

Hi rockguy,

I've been reducing the image size, but no luck. I had to borrow a rendering program of a friend to do it. Now it's finished.