Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Removing the brackets from a dimension 3
- Thread starter yvonne
- Start date
-
1
- #2
automationbabe
Mechanical
Tools>Options>Document Properties>Dimensions Deselect the "Add parentheses by default" option.
-
1
- #3
Yvonne,
Automationbabe has told you how to create new dimensions without brackets. I recommend this too, since I use the reference dimensioning feature to apply real dimensions.
To remove brackets from the existing dimension, right click on the dimension and select properties. Deselect "Display with parentheses".
JHG
Automationbabe has told you how to create new dimensions without brackets. I recommend this too, since I use the reference dimensioning feature to apply real dimensions.
To remove brackets from the existing dimension, right click on the dimension and select properties. Deselect "Display with parentheses".
JHG
-
1
- #4
Open a new drawing, part, or assembly, do as Automationbabe has suggested. Then save the drawing, part, or assembly as a Template. So you don't have to set that option every time.
Regards,
Scott Baugh, CSWP![[borg2]](/data/assets/smilies/borg2.gif "[borg2] [borg2]")
faq731-376
Regards,
Scott Baugh, CSWP
faq731-376
- Status