Remove unless zero in part list

[cubalibre000]

Hi,
It's possible to remove unless zero in part list like the image attached ?

Thank you...

Using NX 8 and TC9.1

 

[JohnRBaker]

Where did these values come from? If they were counting the 'Qty' of a Component in the Assembly they should have been shown as integers.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[cubalibre000]

They came from DB_UNITS gr (grams) file properties.
Some parts are in quantity and others are in different units.
I use this workaround for components like Oil, Loctite and so on.
Correct or this is unsupported workaround ?

Thank you...

Using NX 8 and TC9.1

 

[JohnRBaker]

Try selecting this column, press MB3, pick 'Cell Style' and on the 'Cells' tab change the 'Format' to 'Number' and set the 'Decimal Places' to '0'.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[cubalibre000]

If I set the 'Decimal Places' to '0', the value 0.001 begun 0.
I want for 1.000 that are components quantity begun 1 and 0.001 rest 0.001.
If it's not possible, it's ok.

Thank you...

Using NX 8 and TC9.1