Hi
I am running an experiment using an old cooking gas bottle as a pressure accumulator on a domestic water system to reduce the surge of the pump constantly cutting in and out. So far is very successful with the exception of the residual gas smell in the bottle which ends up in the pumped water.
My Question is -- how can I / what do I need to do to rid the bottle of this residual smell. I have purged the bottle with copious amounts of air and water, this has made a small difference but not eliminated the problem completely. I would think that the "smell" in probably impregnated into or even bonded to the corrosive layer which the bottle surely has on its inside.
Any help would be greatly appreciated.
Naresuan University
Phitsanulok
Thailand
I am running an experiment using an old cooking gas bottle as a pressure accumulator on a domestic water system to reduce the surge of the pump constantly cutting in and out. So far is very successful with the exception of the residual gas smell in the bottle which ends up in the pumped water.
My Question is -- how can I / what do I need to do to rid the bottle of this residual smell. I have purged the bottle with copious amounts of air and water, this has made a small difference but not eliminated the problem completely. I would think that the "smell" in probably impregnated into or even bonded to the corrosive layer which the bottle surely has on its inside.
Any help would be greatly appreciated.
Naresuan University
Phitsanulok
Thailand