Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Relief Valve

Thread starter fwoody2000
Start date Mar 30, 2005

Status: Not open for further replies.

Mar 30, 2005

fwoody2000

Chemical

I am currently having problems with a torsion bar relief valve. The valve will lift light, chatter or have too long a blowdown, depending on the blowdown setting. Does the blowdown setting affect the lift point?
Running out of ideas to stop the problems, any advice?