Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Regarding use of E6013 above 12mm as per Api 650

Status
Not open for further replies.
purode333

purode333

Mechanical
Joined
Sep 16, 2016
Messages
58
Location
NG
Dear sir,

As per API 650, above 12mm E7018 has to be use. Means up to 12mm E6013 has to use.
I have only query to ask that, why e6013 not allow to use above 12mm.


Regards
Prasad
 
Status
Not open for further replies.

Similar threads

mechengineer
  • Question Question
Studding Flange Design as per Code
Replies
1
Views
3K
r6155
r6155
YuJie_PV
  • Question Question
some questions regarding the buckling analysis(5.4 of ASME VIII-2)
Replies
3
Views
10K
TGS4
TGS4
FAHADRANA
  • Locked
  • Question Question
WQT for Combination of Welders as per ASME Sec IX
Replies
3
Views
4K
DekDee
DekDee
hugo50ml
  • Locked
  • Question Question
Concerns Regarding ASME Certification and Company Conduct
Replies
0
Views
2K
hugo50ml
hugo50ml
GOSP75
  • Question Question
Regarding requalification of procedure qualification required or not for when welding FCAW filler wire brand name change
Replies
0
Views
1K
GOSP75
GOSP75

Part and Inventory Search

Sponsor

Back
Top