I have been advised that, in order to refurbish a worn hard chrome plating on a component, I will have to completely remove the old plating and re-deposit a new one (i.e. onto base material). Is there any reason why the existing Cr surface cannot be activated and plated onto?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Refurbishment of hard chrome plating
- Thread starter gcb
- Start date
I can only suggest that 'mechanical keying' is the issue here gcb. Basically, chrome (as does any surface coating/treatment) likes a good base and will not tolerate contamination - adding chrome over an old or partly worn chromed surface will risk the new surface flaking off.
- Status
Similar threads
- Locked
- Question
- Locked
- Question