Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reference Books on how to apply GD&T to help designers make parts that are inspectable?

Status
Not open for further replies.
Tunalover

Tunalover

Mechanical
Joined
Mar 28, 2002
Messages
1,179
Location
US
I've heard plenty of complaints over the years from dimensional inspectors getting drawings with GD&T that is tough or impossible to inspect.

I'm writing a design & drafting guideline where I want to show many ways of dimensioning and tolerancing parts so that they are easily inspected.

Are there any metrologists or dimensional management guys on here that can tell me where to find this kind of information? I'm talking about books and/or wessites with many examples rich with illustrations, drawings, GD&T, etc.

TIA
Bruce Jackson
aka Tunalover



Tunalover
 
Status
Not open for further replies.

Similar threads

Qcprick63
  • Locked
  • Question Question
GD&T Question
Replies
3
Views
343
Qcprick63
Qcprick63
Stone Jordan
  • Locked
  • Question Question
How to know exactly which filler metal?
Replies
3
Views
5K
Dhurjati Sen
Dhurjati Sen
O
  • Locked
  • Question Question
points to capture on a 3D measurement
Replies
4
Views
2K
IRstuff
IRstuff
dogbural
  • Locked
  • Question Question
MMC to a diameter
Replies
2
Views
1K
3DDave
3DDave
Joel_Lapointe
  • Locked
  • Question Question
Attribute gage r&r
Replies
2
Views
2K
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top