I am not familiar with plastic pipes but recently have to use ABS pipes for a project. In order to taper down ABS straight pipes from 355mm OD to 315mm OD, should I use a reducing socket or reducing bush? Both items in the required dimensions are available in the catalogue.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reducers
- Thread starter IKsy
- Start date
Either is suitable. The redcuing bush will increase the head loss across the fitting but would normally negligible in the overall schems of things.
By the way what standard are you using for ABS and what catalogue? Given the metric dimensions I would hazard a guess at AS3518 and Tyco Eurapipe's product.
“The beautiful thing about learning is that no one can take it away from you.”
---B.B. King
By the way what standard are you using for ABS and what catalogue? Given the metric dimensions I would hazard a guess at AS3518 and Tyco Eurapipe's product.
“The beautiful thing about learning is that no one can take it away from you.”
---B.B. King
- Thread starter
- #3
Thank you for your input. Yes, you are absolutely correct. I am referring to the Tyco Eurapipe catalogue using AS3518.
The standard ABS fittings such as tees and tapers are not as comprehensive, in terms of available dimensions, as MSCL or DI products but according to the supplier, they custom made to order. I am still more comfortable using MSCL or DI products.
The standard ABS fittings such as tees and tapers are not as comprehensive, in terms of available dimensions, as MSCL or DI products but according to the supplier, they custom made to order. I am still more comfortable using MSCL or DI products.
I have been designing with this ABS for 35 years and am very comfortable with it. Contact me and I can send you a presentation
“The beautiful thing about learning is that no one can take it away from you.”
---B.B. King
“The beautiful thing about learning is that no one can take it away from you.”
---B.B. King
- Status