Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Redox or Sulfatreat 1
- Thread starter LuizSouza
- Start date
-
1
- #2
SulfaTreat
Mechanical
HI Luiz,
In terms of better, it's hard to say, as both techniques can treat your 2M m3/day gas (~ 177 mmscf/day).
The question is sometimes what type of treatment you are looking for, or how much would you spent per m3.
If SulfaTreat is used it'll cost you $0.0015 /Mcf (~ 29 Nm3), & ST material lasting for 1,845 days.
Note: The calculations were assumed to be at 150 psi (~ 10 Bar), 60 F (~ 15 C) & using 12 vessels each of 144 inch diameter & 30 ft height.
The best thing about SulfaTreat is a NON ATTENDABLE, NON MAINTAINED TREATMENT APPLICAYTION.
Please feel free to contact me for any further clarifications if needed.
Best regards
Thaier Al-Issa
SulfaTreat Acc. Rep
Direct: 403.218-5551
Fax: 403.290-5323
Cell: 403.850-3640
talissa@miswaco.com
In terms of better, it's hard to say, as both techniques can treat your 2M m3/day gas (~ 177 mmscf/day).
The question is sometimes what type of treatment you are looking for, or how much would you spent per m3.
If SulfaTreat is used it'll cost you $0.0015 /Mcf (~ 29 Nm3), & ST material lasting for 1,845 days.
Note: The calculations were assumed to be at 150 psi (~ 10 Bar), 60 F (~ 15 C) & using 12 vessels each of 144 inch diameter & 30 ft height.
The best thing about SulfaTreat is a NON ATTENDABLE, NON MAINTAINED TREATMENT APPLICAYTION.
Please feel free to contact me for any further clarifications if needed.
Best regards
Thaier Al-Issa
SulfaTreat Acc. Rep
Direct: 403.218-5551
Fax: 403.290-5323
Cell: 403.850-3640
talissa@miswaco.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question