Safety and Control
Mechanical
Can anyone explain what is outlet static pressure in reaction force calculation?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reaction force
- Thread starter Safety and Control
- Start date
- Status
The Obturator
Mechanical
If it is a right angled safety relief valve/pressure relief valve, then the outlet static pressure is the pressure acting on the valve outlet at full flow. It takes account of the actual relieving capacity, the molecular weight, temperature and outlet (not nozzle) area etc. This is all required to calculate the reaction force. You can find this in API-RP-520 or any reputable PRV manufacturers Engineering Manual.
Per ISO, only the term Safety Valve is used regardless of application or design.
Per ISO, only the term Safety Valve is used regardless of application or design.
- Status
Similar threads
- Locked
- Question
