Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reaction force residual and over-all accuracy

Status
Not open for further replies.
Pingen

Pingen

Mechanical
Joined
Feb 8, 2007
Messages
80
Location
SE
Hi,

How large reaction force errors should one tolerate. Is it the ratio between the actual force and the force calculated by the fea that matters, or is it the absolute difference?

Pingen
 
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
Ahmed_abdelgawad
  • Question Question
CDB and ‘prnsol,s’
Replies
0
Views
6K
Ahmed_abdelgawad
Ahmed_abdelgawad
W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
vickyiamlucky
  • Locked
  • Question Question
Ansys Symmetry model to full model cut boundary dispacemnt or force bc
Replies
0
Views
727
vickyiamlucky
vickyiamlucky
V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
606
vsw
V

Part and Inventory Search

Sponsor

Back
Top