Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Re-running an analysis from Step 2

Status
Not open for further replies.
Jlog50

Jlog50

Mechanical
Joined
Sep 16, 2010
Messages
118
Location
GB
Hi

After completing an analysis which contains step 1 and step 2, is there anyway in keeping step 1 the same but making changes to step 2 and then re-running the analysis from step 2 to save solving time?

Thanks
 
Sort by date Sort by votes
Yes. Read about using the restart file in the users manual.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Locked
Abaqus: transferring solution field from one instance to another between steps within same analysis.
Replies
2
Views
4K
Ron_ron
R
Adil Memet
  • Question Question
Abaqus Metallurgical phase transformations simulation example running problem
Replies
6
Views
8K
Adil Memet
Adil Memet
mj345
  • Question Question
Dynamic analysis
Replies
1
Views
4K
FEA way
FEA way
E
  • Locked
  • Question Question
ABAQUS RUNNING ERROR
Replies
3
Views
4K
EbrahimGamaleldin
E
A
  • Question Question
Invalid Restart Step Error (Static to Explicit)
Replies
3
Views
2K
an_02
A

Part and Inventory Search

Sponsor

Back
Top