Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Ramberg-Osgood
- Thread starter irmmb
- Start date
I hope, I mean the correct material model ...
I think you need: E, nue, sigma0, n and alpha
... wiki:
and the section in the Abaqus Analysis User's Manual:
19.2.13 Deformation plasticity (in the 6.7EF release at least)
There are the equations.
I think you need: E, nue, sigma0, n and alpha
... wiki:
and the section in the Abaqus Analysis User's Manual:
19.2.13 Deformation plasticity (in the 6.7EF release at least)
There are the equations.
- Status