RAM output

[RonnyRaygun1]

Just started using RAM and am beginning to get to grips with it, but am at a loss as to how to get report output for single elements.
I just want the bending moments and shears for the beams at one level, and try as I might, I can't get what I need. No-one else in the office has much more experience of the software than me and so are unable to help.

Help would be fantastic!

 

[RonnyRaygun1]

Oh, I'm using RAM Concrete if that helps.

 

[SethGuthrie]

In RAM Concrete Beam, the demand envelope is shown in the view/update dialog box for each beam line. For whatever reason there is no specific report that shows the bending and shear graphically. You can use the concrete analysis mode report - beam line force envelope if you are only interested in gravity loads, or you can use the concrete beam mode report - beam design to get critical forces at all stations along the beam.