Rainfall Data -IDF curves etc

[BD]

Does any one have information for stormwater data for the state of Alabama. I am trying to develop a data base for my Terramodel software. After looking all over the place I have finally found the curves from TP #25 and have downloaded TR-55 and printed manual, I just want to make sure that I have all the info to make accurate calculations.<br>
I am also looking for any straightforward text to give me insight into calculating pipe sizes, detention/retention ponds etc. I am a draftsman/beginning designer that needs to get up to speed as quickly as possible, my engineer boss<br>
is constantly on the run and difficult to tie down for a hydrology lesson.<br>
<br>
Thanks in advance - any help will be appreciated!!!!

 

[dycster]

You might want to try the university of Alabama. Some of the professors have already produced some work on IDF curves for the State. Dr. &quot;Rocky&quot; Duran is an expert in the field of hydrology and can be a great help. Two other documents you may need to help you out are TP-20 and Hydro-35. Both publication can be obtained from the National Weather Service or NOAA. Additionally, the NWS and USGS have done localized studies in your area - so contact their local offices to obtain their publications.

 

[cplk]

Try a search on the net for SMADA. Also Hydlogy Water Quantity and Quality Control,Martin Wanielista, Robert Kersten and Ron Ealglin. Published by John Wiley & Sons, Inc.ISBN 0-471-07259-1 The book and SMADA program come as one about $80.00. Well worth it.