Qyt. in the Title Block

[MFDO]

Hi,
I could automate to propagate attributes to the Drawing's Title Block but the Qty.

Since the file names are unique to this project, the parts with a drawing will not be used in any other project. Therefore Assembly's Qty could be a static value (A constant) for those parts driven by the system saved in the part's attribute.

How could I do this?

Michael Fernando (CSWE)

http://www.solidCADworks.com

Tool and Die Designer
Siemens NX V8.5 + PDW
SWX 2013 SP3.0 X64
PDMWorks 2013
Logopress3
FastForm Advance
FormatWorks

 

[looslib]

In a BOM table, you can define a field/column as QTY.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli